Details
https://www.supercheapauto.co.nz/p/dupli-color-dupli-color-touch-up-paint-glacier-white-dst52---150g/412905.htmlPromotions
Additional Information
Product Info
Product Info
Dupli-Color automotive paints are acrylic based lacquers available in factory matched colours for use on exterior automotive applications and general-purpose items around the home garage and shed. The Dupli-Color Autospray system duplicates the manufacturer's original colour to ensure you can achieve a great finish in three easy steps.
Dupli-Color Autospray Touch-Up Paint consists of a simple to use aerosol range of primers, basecoats and top coat clear to enable you to refinish minor chips, scratches and scuffs through to larger repair jobs in three easy steps:
Prime - Using the Dupli-Color selection guide, select the appropriate primer for the surface being painted and apply to ensure a solid base with which to apply your colour matched paint.
Paint - Using your manufactures vehicle paint code, select the correct paint from the Dupli-Color selection guide and apply the colour matched basecoat over your appropriately primed surface.
Protect - Apply Top Coat Clear to prevent fading, discolouring, scratching and UV damage. It also serves to increase the gloss level of painted surfaces.
For more information on the correct colour to use for your vehicle, download the Dupli-Color selection guide below.
Features
- Factory matched colours
- Acrylic based lacquers
- Perfect for minor chips, scratches and scuffs, through to larger repair jobs
- Includes brush
Tech Spec
Volume: | N/A |
---|---|
Weight: | 150g |
Colour / Finish: | Various Colours Available |
Characteristics: | |
---|---|
Base: | Acrylic |
Paint Type: | Base Coat |
Heat Resistant: | 120 degrees celsius |
Preparation: | |
---|---|
Surface Preparation: | Lightly sand surface and clean with Wax & Grease Remover |
Suitable Primer: | Prime cleaned surface with a suitable primer from within the Dupli-Color Aerosol Primer Range |
Application: | |
---|---|
Application Method: | Aerosol |
Suitable Substrates: | Metal, Wood, Plastic & Fibreglass |
Thinning: | N/A |
Thinning Ratio: | N/A |
Recommended Application Temperature: | 10-30 degrees celsius |
Recommended Application Humidity: | Below 80% |
Finishing: | |
---|---|
Suitable Base Coat: | Dupli-Color Top Coat Clear |
Coverage: | |
---|---|
Coverage: | 0.5-0.75m2 |
Number of Coats Recommended: | 2-3 coats |
Drying: | |
---|---|
Touch Dry Time: | 20 minutes |
Re-Coat Time: | 4 hours |
Full Cure Time: | 3-4 days |
Clean Up: | |
---|---|
Clean Up: | Acrylic Thinner |