Images
Details
https://www.supercheapauto.co.nz/p/nolathane-control-arm-lower-front-rearassembly-lh-inc-ball-joint/SPO9988296.html
Promotions
Additional Information
Product Info
Product Info
Nolathane polyurethane suspension bushings are not bonded by compression. Nolathane bushings are mechanically fitted with minimal crush of the urethane material, and the centre pin is lubricated so the component freely pivots without restriction.
Combined with Nolathane’s ability to maintain the bush shape, this free pivoting provides sharper handling response and greatly increased suspension control. Technical developments in suspension design have provided many of today’s vehicles much improved on-road handling. Using Nolathane suspension bushings ensures there is no weakness in the suspension and therefore maintains steering control.
Nolathane bushings bring the following improvements to your suspension:
- Outstanding abrasion resistance
- High load bearing capability (4WD’s, utes and towing)
- Flexibility
- Increased tensile strength
- Chemical resistance to oil, grease, ozone and weathering
- Alignment correction via adjustable bushings
- Enhanced road holding, steering and performance
- Less change in suspension geometry under load, braking and through corners
- Longer suspension life and less repair time
- Longer tyre life
The Result:
Nolathane was originally designed to replace brass bushings in vehicles competing in hillclimb events. Therefore the early formulation was very hard, as it was designed to replace brass, not rubber. Whilst it was great for competition use it was too harsh for normal street use.
Over the years, just like vehicle and suspension system designs, things have changed. Today Nolathane is manufactured in various durometers (grades of softness / hardness), with the correct durometer selected for each application. Today’s Nolathane formulations have higher resistance to tear, abrasion and compression whilst being softer than the original formulations!
Features
- Quick & Easy way to lift a standard height vehicle and maintain the standard suspension.
- Rigorously tested by R&D
- Maintains a safe working height for the vehicles standard suspension