Additional Information
Product Info
Product Info
Septone's Paint Stripper is a phenolic based heavy duty paint remover which is designed for the stripping of specialist automotive coatings. However, Septone Paint Stripper is not recommended for the removal of paint from wooden surfaces where the surface is then going to be clear lacquered, because this product will cause irreversible staining of the wood. This product can adversely affect chrome, perspex, rubber and plastic components. Please note, this product is not recommended on fibreglass gelcoats.
Features
- Removes most automotive paint coatings
- Suitable for enamel & varnish removal
- Heavy duty formula
- Australian Made
Tech Spec
Septone Paint Stripper - 500mL
Volume: | 500ml |
---|---|
Weight: | N/A |
Colour / Finish: | N/A |
Characteristics: | |
---|---|
Base: | N/A |
Paint Type: | N/A |
Heat Resistant: | N/A |
Preparation: | |
---|---|
Surface Preparation: | Clean surface with Wax & Grease Remover |
Suitable Primer: | N/A |
Application: | |
---|---|
Application Method: | Brush |
Suitable Substrates: | Metal |
Thinning: | N/A |
Thinning Ratio: | N/A |
Recommended Application Temperature: | 10-30 degrees celsius |
Recommended Application Humidity: | N/A |
Finishing: | |
---|---|
Suitable Base Coat: | N/A |
Coverage: | |
---|---|
Coverage: | N/A |
Number of Coats Recommended: | 1 coat |
Drying: | |
---|---|
Touch Dry Time: | N/A |
Re-Coat Time: | N/A |
Full Cure Time: | N/A |
Clean Up: | |
---|---|
Clean Up: | Water |